An ultra hard cresting paint for wood arrows. High quality, cross linked acrylic, sandable coating with a gloss/satin finish.
This coating dries to a gloss coloured film with extremely good sanding properties allowing a very high quality of finish to be obtained. This Acrylic Enamel is specially formulated to bond to a wide range of surfaces.metal surfaces Has a very hard and durable finish 1-2 hour drying time. Water resistant, stain resistant, heat resistant water wash up.
These tough, durable enamels are available in a large range of intermixable colours which are perfect for cresting wood arrows. Suitable for brush or airbrush application.
Ensure the surface to be coated is clean and free from grease, wax or polish
Apply 2-3 coats.Dilute 10% with water to prime porous surfaces. Use a good quality synthetic brush. Stir well before use.
Apply to a test area before application.
Any equipment used can be cleaned using soap and water before the coating dries. Wipe any excess off surfaces with a damp cloth. Any dried deposits will need a paint stripper to remove them.
Cresting paint application and advice
Surface must be clean, dry and free from dust, dirt and contamination.
Mix well. Try a test area first. Apply the first coat and allow to dry. Two thin coats are better than one thick coat.
All colours are intermixable.
Protect from extremes of temperature during storage and application
Health, safety and the environment
Non-hazardous. Keep out of reach of children. Contact with eyes - wash immediately with warm water. Wash brushes in warm soapy water. Do not empty into drains or watercourses.